this product is a new type of waterproof material developed in developed countries such as europe, america, japan and korea in recent years. it is a two component waterproofing architectural waterproof coating made from building polymer emulsion and special cement as the main raw material and added with other admixtures.
environmental protection products, water-based tasteless, convenient construction, wide range of application, construction of complex parts has obvious advantages.
after curing, a seamless and complete elastic waterproof layer is formed, which improves the construction
the waterproof and impermeability of the project can not be achieved by coiled material products.
the coating film has high strength and extensibility, and has strong adaptability to base cracking or expansion.
the maintenance is convenient, and the original waterproof effect can be achieved only by partial maintenance of the damaged parts.
the product has bright colors, can play the role of decoration and beautification, the moisture content of the base is not strict, and the wet base surface can be constructed.
the base course shall be smooth, firm and free from sand, and the depression shall be leveled with mortar.
when mixing, first pour the liquid material into the bucket, and slowly pour the powder while stirring, and then use it after mixing evenly.
when painting, pour the prepared material onto the base course and spread it evenly with a scraper or brush. each coat should be between 0.5 mm and 1.0 mm. the construction times should be determined according to the requirements.
the experiment of avoiding water should be done after 7 days.
the storage temperature of the product is above 0 ℃ and the construction temperature is above 5 ℃.